Preparation
Carefully prepare surface to obtain good results. Surface must be clean, dry and free from defective or non-cohesive material, dust, oils, soap, shampoo residue and salts. Clean the surface thoroughly using a stiff bristle brush and soap water. Rinse-off well and allow to dry before degreasing the surface with a thinner soaked rag.
► New glass, tiles, enamel, aluminium, marble:
Apply SMALTO GRIP on a completely dry and clean surface. Normally, one coat is enough. Allow to dry completely (12-24 hours). Apply 1 coat of POLYGLOSS and 1 coat of POLYGLOSS + ADDITIVE 640.
► Old glass, tiles, enamel, aluminium, marble:
Apply SMALTO GRIP on a completely dry and clean surface. Normally, one coat is enough. Allow to dry completely (12-24 hours). Apply 1 coat of POLYGLOSS and 1 coat of POLYGLOSS + ADDITIVE 640.
► Old non absorbing tiles, enamel and marble:
If you wish to varnish the surface, apply 2 coats of SMALTO GRIP on a completely dry and clean substrate.